CorroSeal 1C
CorroSeal 1C is a single-component, hydroactive, cement-based, elastic, and flexible lightweight membrane designed for waterproofing and concrete protection. It is specifically formulated to protect ZLA as an overcoat sealer against water ingress. When mixed with water, CorroSeal 1C forms a smooth, fluid consistency that can be easily applied by hand or sprayed. It contains lightweight fillers, sand, and special polymer powders, and cures without cracking.
Size: 20 kg
Quantity pallet/box: 1 bag
CorroSeal 1C is used as a reliable and permanent waterproofing system for nearly all cases, up to pressurized water up to 6 m water column. CorroSeal 1C is developed to protect ZLA against water ingress but can also be used for positive side (outside) waterproofing of buildings and also usable in wet rooms for waterproofing under tiles. It is applicable on nearly all mineral based solid surfaces with a strength of ≥ 1,5 N/mm².
Typical application areas
- For interior and exterior application
- Foundation protection
- Protection against carbonation and chloride attack
- Car parkings
- Water tanks
- Wet rooms or manholes
- Waterproofing under walls against rising dampness
- For areas constantly submerged in water
- ZLA protection against water ingress
Additional information
| Recommended thickness for waterproofing | > 2mm |
|---|---|
| Consumption | 1.2 kg per mm coating thickness |
| Storage | 6 months |
Technical Data Sheet:
TDS-CORROSEAL-1C-GB.pdf